Atlas Automotive Spring & Alignment Service
Home
Front End Shop
Spring Shop
Products
FAQs
 



Visa
MasterCard
Discover
 
Better Business Bureau
Member since 1975

 

Atlas Automotive Arrow Automotive and Truck Springs
Automotive and Truck Springs

These illustrations show where you will find manufactures numbers, these numbers are needed in order to identify your spring. It maybe necessary to scrape the rust or dirt to reveal the number.

Identification by O.E.M part number:

How can the O.E.M part number be obtained? Use one of the following methods:

  1. Call the local dealer with the vehicle serial number
  2. Truck-build sheet ( line setting sheet ) will often list the front or rear spring
  3. Check the spring for a stamping number as follows:
Full Taper Springs: Part numbers may be found in one of these locations (see illustrations below)
A. On the end of the last leaf B. At the end of the wrapper C. On the side, bottom or top of the clip
Multi Leaf Springs: Part numbers may be found in one of these locations:
    C. On the side, bottom or top of the clip ( most common ) D. On the end of the shortest leaf E. On the bottom of the last leaf besides the center bolt (sometimes this is hidden until the spring is removed)
Three Leaf Trailer Springs:
    F. On the outside of the hook


Copyright © 2004 Atlas Automotive Spring & Alignment Service

Levelfield Website Designs